Epson Printer Printing Blank Pages

You had issues because your Epson printer was printing blank pages. The solutions to this issue are listed below.
When your Epson printer suddenly prints nothing, you’ll feel so strange. Since you acquired it, it’s been operating flawlessly, you could say. Don’t stress; it can be simple to solve.
Examine your device

1. Ensure that your printer is set up on a firm, flat surface.
2. Verify your printer cartridges.
3. Ensure that the paper you use is supported.
Note: Vellum paper and transparency are not supported.
4. Verify that your paper does not contain any blank pages.
5. Verify that your software’s settings for paper size, orientation, and layout are accurate.

Solutions for the Epson printer’s blank-page printing

Work your way down until you find the one that works for you; you might not need to try them all.
1. Verify the ink cartridges.
2. Clear any obstructed nozzles.
3. Reinstall the printer driver

Fix 1: Ink cartridge inspection

You should check your ink cartridges in three different circumstances.
The first and most prevalent problem is a low ink level. It can easily be replaced to address the issue.
One of your ink cartridges is running low on ink, which is the second scenario. In the Epson manual, there is a clause that most readers might overlook: Even if the other cartridges have not run out, you cannot print or copy when an ink cartridge has been used up. When a cartridge is empty, you should swap it out for a fresh one. Otherwise, you can run into the problem with printing blank pages.
The third scenario is when a fresh ink cartridge is installed, but the protective tape is left on. There is protective tape on new cartridges. In addition to preventing ink leaks, it also safeguards the print nozzles of delicate ink cartridges. However, you should exercise caution while removing the pointed mechanism or additional clear plastic, since doing so could cause your cartridge to leak or stop working altogether.

Step 2 :Cleaning your clogged Nozzles.

Your nozzle may clog and result in the printing blank issue if you haven’t used your printer in a while or if you disregard the low ink alert when using it. You can use the built-in Epson printer feature to clean the nozzles in one or two cycles to remedy the issue.
Make sure there are no errors displayed on the printer’s LCD screen before continuing with the instructions below:
1. Press the printer’s Home button, choose Setup, and then click Maintenances.
2. Choose Check Printhead Nozzle.
3. To begin the check, your printer will print a sheet with four coloured grids to show which nozzles are blocked.
4. Select Clean the printhead and proceed if there are any gaps or faint lines.
Reminder: Avoid shutting down your printer during a cleaning cycle. Your printer will be harmed if you don’t.
You can get further information by contacting Epson if your printer is still covered by warranty and you didn’t notice any improvements after cleaning. However, you can manually clean the nozzle if your product is no longer covered by warranty.
It is not recommended to utilise this printhead cleaning cycle too frequently. Epson advises letting your printer rest for at least 6 hours following a cleaning cycle before performing another one. Repeating this method can exacerbate your clog and consume a significant amount of ink.

Step3.Update your printer driver as a third fix

To function properly, Epson printers require drivers. Incorrect or outdated drivers may lead to issues. The right driver might be obtained manually or automatically.
Manually
To manually download the correct driver for your Epson printer, go to the Epson support website, search for your printer, and then choose the driver that corresponds to your particular flavour of Windows version (for instance, Windows 32 bit).
After downloading the appropriate drivers for your system, double-click the downloaded file and install the driver by following the on-screen prompts.