HP Envy 4502 Printer

Description

• ISO speed: Up to 5.2 ppm for color and 8.8 ppm for black
• Scan resolution: Hardware up to 1200 x 2400 ppi
• Type of scan: Flatbed
• Copy rate: 8 Up to 4 cpm of color, up to 6 cpm of black
• Connectivity norm: 1 High-speed USB 2.0; one 802.11n WiFi
• Duty cycle: 1,000 maximum pages
• Display: 2.0 inch (5 cm) LCD High Resolution
• Zero-border printing: Yes (up to 8.5 × 11 in, 216 x 297 mm) (up to 8.5 x 11 in, 216 x 297 mm)

HP Envy 4502 Printer Setup

Step 1: Restore the printer’s Wi-Fi configuration mode.

Restoring Wi-Fi setup mode can get a printer ready for a Wi-Fi connection.

• The printer enters Wi-Fi setup mode for roughly two hours after the settings are reset, making it discoverable while the HP software is being installed.
• The majority of touchscreen printers: Select Network setup or Settings, then select Restore Network Settings from the Wireless or Setup menu.s
• For the vast majority of inkjet printers without touchscreens, hold down the Wireless and Cancel buttons while holding down the Power button until it flashes. After that, watch for the Wireless light to flash.

Step 2: Install HP Smart App

On your PC or smartphone, install the HP Smart app.

• If you’re setting up the printer on a Wi-Fi network, do the following.
• Put the HP Envy 4502 printer, computer, and phone next to the Wi-Fi router.
• Connect to your network by turning on Wi-Fi on your computer or mobile device. Use the Wi-Fi connection during setup if the computer is currently linked to the network with an Ethernet cable instead.
• So that HP Smart can identify the printer during setup, turn on Bluetooth on the PC or mobile device.
• Install HP Smart for iOS and Android, then allow the app to use your location to find the printer and provide setup guidance after enabling the mobile device location function.