How to setup your HP ENVY 4527 Printer

This article brief in about the issues related to HP ENVY 4527 Printer.

The issues like setting up your HP ENVY 4527 Printer, installing the driver for HP ENVY 4527 Printer or fixing the issues like color not printing, black not printing, printing blank pages, issues like paper jam, or to fix your scanner issue for HP ENVY 4527 Printer. You can refer to this article and follow the given steps to resolve your issues related to the HP ENVY 4527 Printer.

How to setup HP ENVY 4527 Printer

There are several steps to follow to setup HP ENVY 4527 Printer:

Step 1: Get the HP ENVY 4527 Printer out of the box

• Take the HP ENVY 4527 Printer out of the packaging.
• On the printer’s control panel, remove the sticker.
• Take a firm hold of the handles on either side of the printer, lift the door that gives access to the ink cartridges until it locks in place, and then take out all of the tape and packaging from inside.
• Remove the packing tape, open the input tray door, and pull it in your direction to lengthen the paper tray.
• To close the input tray door, advance the input tray until it snaps into place.
• Reuse the packaging supplies.

Step 2: Set your options and plug in the power cord

• HP ENVY 4527 printer’s back should be connected to the power cord, and the other end should be plugged into an outlet.
• Activate the printer.
• Select your desired language and nation/region on the printer control screen, and then tap Yes to confirm your selection.
• Choose the time and date if prompted, and then tap Yes to confirm your selection.

Step 3: Fill the input tray with paper

• Pull the input tray door toward you to extend the paper tray after opening it.
• Place a stack of paper that is A4 size with the print side down and the short edge forward into the paper tray.
• Till it stops, press the stack into the tray.
• Push the input tray forward until it snaps into place after inserting the paper width guides so that they are flush with the paper’s edges.

Step 4: The HP ENVY 4527 printer’s ink cartridges should be installed

• Before you move forward, wait until the carriage is at rest and quiet.
• Take one of the ink cylinders out of the packaging. Be careful to only touch the ink cartridge’s black plastic.
• The ink cartridge’s plastic tape should be removed.
• Open the cover covering the ink cartridge slot.
• Press the ink cartridge forward into the slot until it snaps into place while holding it by its sides with the nozzles facing the printer.
• To lock the ink cartridge into position, close the cover on the ink cartridge slot.
• To install the second ink cartridge, follow the same procedures as before.

Step 5: Set the HP ENVY 4527 Printer ink cartridges in place.

• Open the lid of the scanner.
• Place the alignment page on the scanner’s glass with the print side facing up. Put it in place following the engraved directions on the glass. On the scanner’s glass, place the alignment page.
• After touching OK on the printer control panel, close the scanner cover.
• The ink cartridges are aligned by the printer.

Step 6: Install the printing program.

How to install HP ENVY 4527 Printer Driver

We’ll go over the HP Envy 4527 Printer driver installation procedure. These installation procedures work with all versions of Windows.

• To begin installing the drivers, double-click the HP driver package and select the “Run” option.
• Watch for the driver files to be extracted.
• Click “Continue” after the number “2” changes to the color “Blue.”
• Then click the “Next” button after selecting the “I have reviewed and accepted the installation agreements and settings” checkbox.
• Watch as your computer installs the HP driver bundle.
• Select “USB cable” from the Connections Options menu, then click “Next.”
• You have the option of connecting your printer to your computer using a USB cable right away or at a later time when asked to do so. We decided to complete it later. To move on, click the “Skip” button now.
• To finish installing the driver, click the “Finish” button.
• On your computer, the whole HP ENVY 4527 Printer driver feature has been installed. Printing can now be done by connecting your printer to your computer.

How to fix HP ENVY 4527 Printer offline issue

Make sure the ‘Use Printer Offline’ option is not chosen on your printer to fix HP ENVY 4527 Printer offline issue.

If “Use printer in offline mode” is chosen, the HP ENVY 4527 Printer becomes inoperable. As a result, the user must make sure that this option is not chosen. The following navigation will help you change this setting:

• Go to the “start” menu and then click on “settings”
• Select the “devices” and then “printers and scanners.”
• Select your HP printer with the right click from the list of printers.
• After that, uncheck the “Use Printer Offline” option from the menu. Your HP printer will now resume printing online.

To fix HP ENVY 4527 Printer offline issue, make sure your printer is “Set as default printer.”

• Follow these troubleshooting instructions if your HP printer continues going down on Windows 10 or any other operating system:
• Run can be accessed by pressing the Windows button. Enter “Control Panel” now and click “OK” in the dialogue box.
• Your mentioned HP printer will appear once you select the “Device and Printer” option. If your printer is marked with a green checkmark, it has already been “configured as default.”
• If not, then select “Set as a default printer” from the context menu when you right-click on your HP ENVY 4527 Printer.

How to setup wireless HP ENVY 4527 Printer

To setup wireless HP ENVY 4527 Printer check the following connectivity and network settings:

To check connectivity, use HP Print and Scan Doctor.

• HP Print and Scan Doctor can be downloaded.
• Select your printer after clicking Start in HP Print and Scan Doctor after it has opened.
• Click Retry after turning your printer on and off if it’s not listed.
• Follow HP Print and Scan Doctor’s advice if there is a connectivity issue.
• Click Yes if a box asks you to enable printer updates.
• If you are asked to set your printer as the default printer on a screen, select Yes.
• Try printing.

Print the page for network settings.

1. Push the product’s Wireless button.
2. Click the button next to the display’s down arrow until Print appears.

Configure a Static IP Address

• Activate your web browser.
• Enter the IP address of your HP ENVY 4527 Printer into the address bar of your web browser. If you typed in the correct address, the HP printer management panel ought to show up.
• On the Networking tab, click.
• Go to Connections and select Wired..
• Fill in the appropriate fields with the IP address, subnet mask, and default gateway.
• Tap Apply.

How to fix color not printing in HP ENVY 4527 Printer

To fix color not printing in HP ENVY 4527 Printer follow these instructions to resolve your problem:

• Reinstalling the printer driver, including the Windows and HP versions. I followed the directions to execute printui.exe /s, remove the HP printer folder concurrently, and uninstall any software associated with HP printers.
• Completely reinstalling Windows.
• Utilizing the Windows printer troubleshooter
• Using the HP Print and Scan Doctor program.

How to fix jam issue for HP ENVY 4527 Printer

The HP ENVY 4527 printer’s paper jam issue can be resolved by taking the procedures shown below:

Step 1: Look for paper that is stuck.

There are various places where paper that has become jammed may become obstructed. Retry printing after clearing any paper jams in one location. If the issue continues, look for any paper jams in the following region.

• Clear the input tray of any stuck paper.
• Clean out the output tray of any stuck paper.
• Remove stuck paper from the area where ink cartridges are accessible.
• Remove any stuck paper from the ADF.
• Remove any stuck paper from the printer’s base.

If the issue still exists after you have checked each printer area for paper jams and cleared them out, move on to the next step.

Step 2: Ensure that the carriage may freely travel across the printer’s width.

• If the HP ENVY 4527 Printer is not already on, turn it on.
• Gently lift the ink cartridge access door until it locks into place while holding the handles on either side of the printer.
• The printer’s carriage is moved to the printer’s centre.
• Before moving on, pause until the carriage is motionless and quiet.
• Disconnect the power cord from the printer’s back while it is still powered on.
• Examine the carriage with a flashlight for any paper or items that might be obstructing it, and then take out any that you find.
• By using the access door for the ink cartridges, reach inside the printer and move the carriage by hand.
• Take out any paper or other obstacles you find.
• Verify that the carriage can travel freely over the printer’s width. Push the carriage of the printer firmly to the left side, then to the right.
• Turn on the printer after reattaching the power cord to the printer’s back.

How to fix black not printing for HP ENVY 4527 Printer

To fix black not printing for HP ENVY 4527 Printer follow the two methods given below:

• Make the ink cartridges clean.
• Swipe the display to the left on the printer control panel, then tap Setup.
• Touch Clean Cartridges after touching Tools.
• When asked to proceed to the next level of cleaning if the print quality is inadequate, select yes.

NOTE: A second cleaning session may be necessary if the printhead is seriously clogged. In that case, wait 30 minutes before repeating both cleaning levels.

• Create a report on Print Quality Diagnostics.
• Swipe the display to the left on the printer control panel, then tap Setup.
• On the display, swipe up and then tap Print Quality Report.
• Check the color blocks on the Print Quality Diagnostic report to verify sure there are no white lines, fading, or missing color blocks.

How to fix printing blank pages issue for HP ENVY 4527 Printer

To fix printing blank pages issue for HP ENVY 4527 Printer follow the instructions given below:

• Check if printing a Diagnostic Page works by trying it.
• Make sure to place white, simple paper in the input tray.
• Swipe the display to the left on the printer control panel, then tap Setup.
• On the display, swipe up and then tap Print Quality Report.
• A report on print quality diagnostics is printed.
• A Print Quality Diagnostic report prints.

• Save the Print Quality Diagnostic report for further use in this document when needed.

How to fix scanner issue for HP ENVY 4527 Printer

I would advise you to first delete the HP Smart App and all HP software from the computer to fix scanner issue for HP ENVY 4527 Printer. Here’s how to go about it:

1. Find and launch Programs and Features in Windows.
2. Pick an HP ENVY 4527 printer.
3. Click on Uninstall.
4. Find and open Devices and printers in Windows.
5. Look for your HP printer in the Devices and Printers windows.
6. Press “Windows key + R” to launch the run command.
7. Input printui.exe /s, then hit OK. (Note: “printui.exe” is separated by a space.)
8. Select the “Drivers” tab.
9. Search for the HP Printer driver. When you see it at the bottom, select remove after clicking it.
10. Choose “Ok”.
11. On the Print Server Properties windows, choose Apply and Ok.
12. Shut down all hardware and printers