The steps for installing a Canon printer without a CD on the Windows and Mac operating systems are outlined in this article. Both the wired and wireless installation procedures for Canon printers have been described.

You can use the “Canon printer installer” to set up a wired connection on Windows without a CD by following the procedures listed below.

First, make an effort to connect your Windows computer and Canon printer properly using the printer’s USB wire.

From the Start button, select the “Devices and Printers” option. After that, select “Properties” from the right-click menu of the printer icon on the newly appeared screen.

After selecting “Ok,” verify the name and model number of your Canon printer and minimise the current screen.

Next, perform a right-click on the “Computer” item in the Start menu and choose “Manage” from the menu that appears.

Now select “Device Manager” in the bottom-left corner of the screen. After that, select “Other Devices” from the list of available choices.

While still in the same window, use the right-click menu to select “Update Driver Software” next to your model.

Continue to follow the directions that are displayed on the screen here and select “Next.”

After you get a notification confirming that you have successfully inserted your printer, select “Finish” from the menu.

After running a print test, restart your computer at this point.

After your computer properly restarts, select “Printer Properties” under “Devices and Printers” in the Start menu.

Select “Print test page.”

Your printer is now set up and prepared for usage.

 From the following box that pops up, select “Browse my computer for driver software.”

 Select “Let me choose from the Canon drivers on my computer” from the menu.

After choosing the “Printer” option, click “Next.”

Select your printer driver from the list of available drivers on the next box and then click “Next.”

Using the Canon printer installation, establish a wireless connection on Windows without a CD.

Here are a few requirements for installing a wireless Canon printer on Windows without a CD.

• A WPS push button that is physically present on the access point is required.

• The WiFi protected access or WPA2 security protocol must be used by the user’s network.

The set-up process is:

• Make sure your printer is turned on first. Your printer’s WiFi button should be pressed and held down until the alert lamp flashes at least once.

• Verify that the button’s nearby lamp is flashing blue. After that, after two minutes, go to the printer’s access point and push the WPS button.

• Both the power and the WiFi lights will cease blinking after the printer successfully connects to your wireless network and will display a steady light.

You can now print a test page using your Canon printer since it is wirelessly linked!

• For comprehensive information on printer setup, additionally see Canon ij installation.