Printer Printing Blank Pages
You could assume that you’ve run out of ink when your printer starts printing blank pages. Therefore, if you purchase fresh printer ink cartridges, everything will return to normal. Although it is a very common source of this problem, an empty ink cartridge isn’t always to blame.
There are numerous possible reasons why a printer might randomly print blank pages. The most frequent ones include clogged nozzles, improper cartridge installation, and empty ink cartridges. Occasionally, issues with drivers and software can also cause this issue.
If your printer is printing blank pages, don’t get upset and have it fixed. You can avoid spending a lot of money on costly repairs by trying the suggested options. Regardless of what is creating the issue, we can provide you a step-by-step guide on how to fix printer printing blank pages.
Turn off your printer
For the majority of devices, a straightforward reset can occasionally fix typical mechanical or operational issues. Follow these instructions to restart your printer:
- Press the Power button on your printer and wait for a complete shutdown.
- The electrical outlet’s power cord should be disconnected. Reconnect the power cord to the outlet after waiting for three minutes.
- To do this, press the Power button on your device. Then test printing should reveal whether printouts are functioning normally or not.
Fix Ink / Toner Cartridge Issues
Your printer will print blank pages if the ink cartridges have problems. Make sure your ink cartridges are completely functional and in proper condition by following the instructions listed below:
- To see whether there is enough ink left, check the Ink / Toner Levels. If there isn’t enough ink in the tank, you’ll need to buy the new cartridges to replace the ones that are empty.
- Remove the ink cartridges and look for damage. Replace any defective units as soon as possible with new ones.
- Check to make sure cartridge is installed properly. One by one, take out the ink tanks and replace them correctly. Verify that each piece is correctly placed in place.
Clean print head Clog (Automatic Cleaning)
An inkjet printer clogged print head can be cleaned using the device’s automatic cleaning cycle. From your printer’s control panel or the Printer Properties area of the Control Panel on your computer, you can start this cycle.
Blockages on the print head are softened and eliminated as a result of the technique, and your printer is instructed to discharge additional ink. If the simple cleaning doesn’t clear the print head obstructions, choose the deep cleaning function option so that your printer won’t print blank pages.
Clean Print Head Clog (Manual Cleaning)
You can choose a manual cleaning if the automatic cleaning approach is unsuccessful.
When you clean the print head avoid cleaning the ink tank’s sponge region. Here is a step-by-step guide on manually cleaning a print head:
- Each ink cartridge unit should be removed from its slot once you have opened the ink cartridge carriage. Remove the Print Head from the Carriage with care.
- A clean, lint-free cloth dampened in warm water should be used to remove any clogged and dried ink from the Print Head. Cleaning the Nozzle area should continue until there is no longer any black ink adhering to the fabric.
- Spend ten minutes soaking the print head in a dish of warm water. Use fresh water only. As the print head soaks, lay a fresh piece of paper towel at the base.
- Remove the print head from bowl and use a dry, lint-free cloth to wipe up water or moisture. The print head should be placed on top of some paper towels and left to air dry for 15 minutes. When the print head is completely dry, reinstall it in the carriage.
- Before you begin printing, perform a Nozzle check to ensure that the print head is clean.
Also Read: Want to Print in Color